Schaffner EMC/EMI產品

  • EMC/EMI產品

    Shaping electrical power

    EMC/EMI產品

    夏弗納提供世界上選擇範圍最廣的EMC/EMI濾波器和Chokes

為專業電力品質模擬及解決方案而設計的電力品質模擬器

Sort by

83 products were found.
FN 9274: Versatile Medical Class II EMC/EMI Filter

FN 9274

Versatile Medical Class II EMC/EMI Filter

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Medical filter suitable for compliance with Protection Class II (ME) according IEC 60601-1
  • Fulfills the requirement for two MOPP (means of patient protection), compliant with IEC/EN 60601-1
  • No leakage current to earth
  • Rated currents up to 15 A
  • Excellent performance/size ratio
  • Front mount, rear mount and snap-in versions (B, MB and S1B type)
  • Plastic enclosure for higher dielectric strength insulation
  • Fast-on terminals or wire leads
  • V-lock compatible

Voltage : ≤ 250 V
Rated current : 1 to 15 A
Leakage current (B types) : 0 A
Attenuation performance : standard
FN 3258: Ultra-compact EMC/RFI Filter for Motor Drives Applications

FN 3258

Ultra-compact EMC/RFI Filter for Motor Drives Applications

  • EMC/EMI 產品
  •  » 三相滤波器
  • New: solid safety connector blocks available for the whole range
  • Exceptional attenuation performance from 150 kHz to 30 MHz
  • Excellent saturation resistance up to 50 m cable length
  • Most compact and slim filter design in its class
Operating frequency : DC to 60 Hz
Rated current : 7 to 180 A
Attenuation performance : very high
Voltage : ≤ 520 V
Motor power : 4 to 110 kW
Leakage current : 33 mA
FN 2090: Multi-stage AC/DC EMI Filter with Excellent Attenuation Performance

FN 2090

Multi-stage AC/DC EMI Filter with Excellent Attenuation Performance

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 二階濾波器
  • Rated currents from 1 to 30 A
  • Two-stage filter
  • Very high differential and common-mode attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
  • Optional enhanced performance versions
  • Optional overvoltage protection (Z type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.08 mA
Attenuation performance : very high
Leakage current : 0.5 to 1.02 mA
FN 2010: General Purpose AC/DC EMI Filter

FN 2010

General Purpose AC/DC EMI Filter

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 一階濾波器
  • Rated currents from 1 to 60 A
  • General purpose filtering performance
  • Optional medical versions (B type)
  • Optional safety versions (A type)
  • Optional enhanced performance versions
  • Optional DC optimized versions
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Leakage current : 0.74 mA
Attenuation performance : standard
FN 3359: High-current EMC/RFI Filter

UL up to 1000A: 600/400 VAC; ENEC up to 1600A: 690/400 VAC

FN 3359

High-current EMC/RFI Filter

  • EMC/EMI 產品
  •  » 三相滤波器
  • Off-the-shelf high power filter for rated currents up to 2500 A
  • HV versions applicable for IT power networks
  • Busbars for convenient and universal electrical connection
  • Protective plastic covers optionally available for unsurpassed safety
Operating frequency : DC to 60 Hz
Rated current : 150 to 2500 A
Leakage current : < 6 mA
Attenuation performance : very high
Voltage : ≤ 690 V
Motor power : 75 to 2000 kW
FN 3287/FN 3288: Smallest book-style EMC/RFI Filter for Inverter and Power Drive Systems

600 VAC

FN 3287/FN 3288

Smallest book-style EMC/RFI Filter for Inverter and Power Drive Systems

  • EMC/EMI 產品
  •  » 三相滤波器
  • Standard and high performance EMC solution
  • Footprint space-saving book-style housing
  • Solid safety connector blocks
  • Standard attenuation performance FN 3287
  • High attenuation performance FN 3288
  • HV versions for 690 VAC applications
  • HVIT- and IT versions for IT distribution networks
  • Versions with low leakage current
Attenuation performance : high
Voltage : ≤ 0
Rated current : 10 to 160 A

FN3840 : Book-style EMC/RFI Filter for regenerative drive application

FN3840

Book-style EMC/RFI Filter for regenerative drive application

  • EMC/EMI 產品
  •  » 三相滤波器
  • Designed for usage together with LCL filter
  • Easy design in with system approach documentation
  • Footprint space-saving book-style housing
  • Thermal shutdown capability
  • Solid safety connector blocks
  • Versions with low leakage current

Voltage : ≤ 0
Rated current : 25 to 380 A
Attenuation performance : high
FN 2580: EMC/EMI line filter for lighting equipment

FN 2580

EMC/EMI line filter for lighting equipment

  • EMC/EMI 產品
  •  » 單相濾波器
  • Voltage rating up to 350 VAC
  • Current rating 2 A, 5 A and 8 A
  • Offers attenuation fitting to lighting application
  • Compact, space-saving design
  • Cable outlets with enhanced length give freedom for flexible installation

Attenuation performance : high
FN 9266: High Performance Power Entry Module with Switch

FN 9266

High Performance Power Entry Module with Switch

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 10 A
  • High quality 2-pole rocker switch
  • Optional reduced leakage current versions (A/B type)
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S type)
  • High attenuation performance
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Attenuation performance : high

FN 9262: High Performance Power Entry Module with Fuses

FN 9262

High Performance Power Entry Module with Fuses

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 10 A
  • Integrated dual fuse holder
  • Optional reduced leakage current versions (A/B type)
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S type)
  • High attenuation performance
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Attenuation performance : high

RT series: Current-compensated Chokes

RT series

Current-compensated Chokes

  • EMC/EMI 產品
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 6 to 20 A
  • Up to 600 VAC and VDC
  • 2- and 3-wire configurations
  • Horizontal and vertical PCB mounting types
  • Ruggedized saturation and thermal behavior
  • Open construction for forced and convection cooling
  • Straightforward pin-out for easy PCB design
Operating frequency : 0 to 400 Hz
Rated current : 6 to 20 A
Attenuation performance : very high
FN 2020: General Purpose AC/DC EMI Filter

FN 2020

General Purpose AC/DC EMI Filter

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 一階濾波器
  • Rated currents from 1 to 60 A
  • High differential-mode attenuation
  • Optional medical version (B type)
  • Optional safety version (A type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Leakage current : 0.74 mA
Attenuation performance : standard
RC series: Current-compensated Chokes

RC series

Current-compensated Chokes

  • EMC/EMI 產品
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 0.25 to 0.7 A
  • DC to 400 Hz frequency
  • 100 kHz to 3 MHz common-mode resonance frequency
  • Dual-choke configurations
  • Multiple PCB-mounting options
Inductance : 4.7 to 47 mH
Rated current : 0.25 to 0.7 A
Frequency (DC) : 400 Hz
Attenuation performance : very high

FN 2211 HV and FN 2210 HV: Compact high current DC EMC/EMI filter

FN 2211 HV and FN 2210 HV

Compact high current DC EMC/EMI filter

  • EMC/EMI 產品
  •  » 直流濾波器
  • Reduces conducted emissions towards the solar panel
  • Reduces the probability of EMI radiation off the solar panel
  • Helps to prevent premature panel aging
  • Helps to meet international EMC regulations
  • Most compact standard solution in the industry
  • FN 2210 HV without Cy capacitors to ground
Climatic category : 40/100/21 acc. to IEC 60068-1
Terminals/Housing : Ni plated cu bars/Metal
Attenuation performance : standard
FN 2030: General Purpose AC/DC EMI Filter with High Attenuation Performance

FN 2030

General Purpose AC/DC EMI Filter with High Attenuation Performance

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 一階濾波器
  • Rated currents from 1 to 30 A
  • High performance filter attenuation
  • High differential-mode attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
  • Optional enhanced performance versions
  • Optional overvoltage protection (Z type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Attenuation performance : standard
Leakage current : 0.34 to 0.87 mA
FN 6840: LCL Filter for Active Front End Motor Drives and Active Infeed Converter

FN 6840

LCL Filter for Active Front End Motor Drives and Active Infeed Converter

  • EMC/EMI 產品
  •  » LCL Filters
  • Line side LCL filtering for AFE and AIC applications
  • Mandatory interface to connect the AFE or AIC-system to the grid
  • Helps to improve the power quality on the grid side
  • Reduces ripple currents and voltage disortions
  • All LCL components in one package
  • Compact design and ready to be connected
Nominal line frequency : 50/60 Hz
Switching frequency fPWM : min. 3 kHz up to max. 10 kHz
Rated current : 25 to 380 A
Rated inductance L2 (inverter/converter side) : 8% @ 400V, 50 Hz and rated current
Rated inductance L1 (grid/line side) : 4% @ 400V, 50 Hz and rated current

FN 9255 E: High Performance dual-stage IEC C14 inlet filter with earth line choke

FN 9255 E

High Performance dual-stage IEC C14 inlet filter with earth line choke

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 15 A
  • Excellent performance/size ratio
  • Earth line choke Version
  • IEC C14 inlet acc. IEC 60320-1
  • Medical versions (B type) acc. to IEC/EN 60601-1
  • Snap-in and rear mount versions (S and M type)
Operating frequency : DC to 400 Hz

Attenuation performance : very high
Voltage : ≤ 250 V
Rated current : 2 to 15 A
Leakage current (B types) : 0 A
FN 9255: High performance dual-stage IEC C14 and C20 inlet filter

FN 9255

High performance dual-stage IEC C14 and C20 inlet filter

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 20 A
  • Excellent performance/size ratio
  • IEC C14 or C20 inlet acc. IEC 60320-1
  • Medical versions (B type) acc. to IEC/EN 60601-1
  • Snap-in and rear mount versions (S and M type)
  • Earth line choke version (Refer to FN9255 E)
Operating frequency : DC to 400 Hz

Attenuation performance : very high
Voltage : ≤ 250 V
Leakage current : 500 µA
Rated current : 2 to 20 A
Leakage current (B types) : 0 A
FN 2060: Multi-stage General Purpose AC/DC EMI Filter

FN 2060

Multi-stage General Purpose AC/DC EMI Filter

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 二階濾波器
  • Rated currents from 1 to 30 A
  • High differential and common-mode attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Leakage current : 0.734 to 0.867 mA
Attenuation performance : standard
FN 409: 75 VDC Input PCB Filter

FN 409

75 VDC Input PCB Filter

  • EMC/EMI 產品
  •  » PCB 濾波器
  • Rated currents from 3 to 13 A, 75 VDC
  • Very compact PCB-mounting design
  • Exceptional attenuation performance
  • High frequency noise compression
IF 13: Power Cord Input EMC Filter IF 13

IF 13

Power Cord Input EMC Filter IF 13

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » Power Cords with Input EMC Filter
  • High frequency attenuation
  • Shielding and ferrite cable
  • Easy to integrate in any design
  • Retrofit for any IEC C14 inlet
  • Rated current up to 10A
  • Various powerline plugs for international usage
IL 13P Angled IEC Lock C13: Power Cord with angled Locking System C13

IL 13P Angled IEC Lock C13

Power Cord with angled Locking System C13

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » 安全型電源線
  • Locking system for standardized IEC C14 inlet filter
  • No accidental disconnection
  • Rated current up to 15 A
  • Fits any Schaffner IEC C14 inlet filter
  • Retrofit for any IEC C14 inlet
  • Various power line plucs for international usage

Color: black
Connector line side: C14; CEE7&VII; BS 1363
Connector load side: C13 with IEC lock
Frequency: 50/60 Hz
Voltage: ≤ 250 V

IL 13P Rewireable Angled IEC C13 Locking Connector: IL 13P IEC C13 Rewireable Angled Connectors with Locking System

IL 13P Rewireable Angled IEC C13 Locking Connector

IL 13P IEC C13 Rewireable Angled Connectors with Locking System

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » 安全型電源線
  • Locking system for standardized IEC C14 inlet filter
  • No accidental disconnection
  • Rated current up to 15 A
  • Fits any Schaffner IEC C14 inlet filter
  • Retrofit for any IEC C14 inlet
  • Various power line plugs for international usage

Color: black
Connector line side: C14; CEE7/VII; BS 1363
Connector load side: C13 with IEC lock
Frequency: 50/60 Hz
Voltage: ≤ 250 V

RS series: Differential-mode chokes

RS series

Differential-mode chokes

  • EMC/EMI 產品
  •  » EMC/EMI Chokes
  •  » Differential-mode Chokes
  • Rated currents from 0.5 to 4 A
  • DC to 400 Hz frequency
  • 500 kHz to 60 MHz differential-mode resonance frequency
  • 40 to 450 microjoules storage
  • Multiple PCB-mounting options
Inductance : 0.003 to 4 mH
Rated current : 0.5 to 4 A
Frequency (DC) : 400 Hz
Attenuation performance : very high
FN 2070: Multi-stage Performance AC/DC EMI Filter

FN 2070

Multi-stage Performance AC/DC EMI Filter

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 二階濾波器
  • Rated currents from 1 to 36 A
  • High differential and common-mode attenuation
  • High frequency attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Attenuation performance : high
Leakage current : 0.734 to 0.867 mA
FN 2080: Multi-stage High Performance AC/DC EMI Filter

FN 2080

Multi-stage High Performance AC/DC EMI Filter

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 二階濾波器
  • Rated currents from 1 to 16 A
  • High differential and common-mode attenuation
  • Good low frequency attenuation
  • Optional medical versions (B type)
  • Optional safety versions (A type)
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Leakage current (A types) : 0.074 mA
Leakage current : 0.734 mA
Attenuation performance : high
FN 2200: EMC/EMI Filter for PV Inverters

(600 VDC) (850 VDC)

FN 2200

EMC/EMI Filter for PV Inverters

  • EMC/EMI 產品
  •  » 直流濾波器
  • Reduces conducted emissions towards the solar panel
  • Reduces the probability of EMI radiation off the solar panel
  • Helps to prevent pre-mature panel aging because of HF leakage currents
  • Helps to meet international EMC regulations for the entire PV system
  • Most compact standard solution in the industry, optionally available without capacitors to ground (B types)
  • New: up to 2300 A
Attenuation performance : very high
Rated current : 25 to 2300 A
Voltage : ≤ 1200 V
FN 2211 and FN 2210: Compact high current DC EMC/EMI filter

FN 2211 and FN 2210

Compact high current DC EMC/EMI filter

  • EMC/EMI 產品
  •  » 直流濾波器
  • Reduces conducted emissions towards the solar panel
  • Reduces the probability of EMI radiation off the solar panel
  • Helps to prevent premature panel aging
  • Helps to meet international EMC regulations
  • Most compact standard solution in the industry
  • FN 2210 without Cy capacitors to ground
Climatic category : 40/100/21 acc. to IEC 60068-1
Terminals/Housing : Ni plated cu bars/Metal
Attenuation performance : standard
FN 2415: Single-phase EMC Filter for Control Equipment

FN 2415

Single-phase EMC Filter for Control Equipment

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 二階濾波器
  • Filter for the control line of complex equipment and machinery
  • To ensure interference-free operation of control equipment (PLC, Motion-, Robot Control etc.)
  • To improve operational reliability and system stability
  • Compact EMC filter design with minimum space requirement

Attenuation performance : high
FN 2410 and FN 2412: EMC/RFI Filters for Industrial Electronics

FN 2410 and FN 2412

EMC/RFI Filters for Industrial Electronics

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 一階濾波器
  • Excellent filter performance for applications with high interference levels
  • Filters for two-phase supply up to 2x 520 VAC (P-P) available
  • Fast and comfortable snap-in installation on popular TS 35 DIN-rails up to 45 A
  • Industrial grade terminal blocks for unsurpassed electrical safety
Operating frequency : DC to 400 Hz
Leakage current : 3.4 mA
Attenuation performance : very high
FN 2450: Safe and ergonomic EMC/EMI filter with very low leakage current

FN 2450

Safe and ergonomic EMC/EMI filter with very low leakage current

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 一階濾波器
  • Light weight plastic enclosure design
  • Very low filter leakage current
  • Hinged safety covers
  • Embedded filter terminals
  • Different performance levels
  • Environmental friendly design without potting compound
Operating frequency : DC to 400 Hz
Leakage current (B types) : 0.002 mA
Attenuation performance : high
FN 3025/FN 3026: DIN-Rail EMC/RFI Filter with Minimum Leakage Current

Design protected by European patent (EP 1727280)

FN 3025/FN 3026

DIN-Rail EMC/RFI Filter with Minimum Leakage Current

  • EMC/EMI 產品
  •  » 三相滤波器
  • Compact state-of-the-art filter concept
  • Light weight plastic enclosure design
  • Minimized filter leakage current
  • Hinged safety covers
  • Revolutionary embedded filter terminals
  • Chassis or DIN-rail mounting option
  • Selectable performance level
  • Environmental friendly design without potting compound
Operating frequency : DC to 60 Hz
Rated current : 10 to 50 A
Attenuation performance : standard
Voltage : ≤ 520 V
Leakage current : 0.4 to 2.5 mA
Motor power : 5.5 to 30 kW
FN 3100: Bookstyle EMC/EMI Filter for Motor Drives

(FN 3100 up to 150 A)

FN 3100

Bookstyle EMC/EMI Filter for Motor Drives

  • EMC/EMI 產品
  •  » 三相滤波器
  • Exceptional broadband attenuation performance from 10 kHz up to 30 MHz
  • Slim and user-friendly book-style design with touch-safe terminal blocks for minimum space and maximum safety
  • Enables compliance with Class B limits
Operating frequency : DC to 60 Hz
Rated current : 35 to 300 A
Attenuation performance : very high
Voltage : ≤ 520 V
Leakage current : 48.9 to 71.5 mA
Motor power : 22 to 160 kW
FN 3120: High-Performance EMC/RFI Filter for Drives

FN 3120

High-Performance EMC/RFI Filter for Drives

  • EMC/EMI 產品
  •  » 三相滤波器
  • High performance filter for extremely noisy applications
  • Significantly improves the reliability and immunity of installations
  • Enables compliance with Class B limits even with very long cables
Operating frequency : DC to 60 Hz
Rated current : 25 to 230 A
Leakage current : 97.9 mA
Attenuation performance : very high
Voltage : ≤ 520 V
Motor power : 15 to 132 kW
FN 3256: Compact Line Filter for Industrial Machinery/Equipment

FN 3256

Compact Line Filter for Industrial Machinery/Equipment

  • EMC/EMI 產品
  •  » 三相 + 中性線路濾波器
  • Compact, space-saving design, optimized for industrial machinery
  • Combines high attenuation performance with low leakage current
  • Performance according to the machine tool standard EN 50370-1
  • Increases also the immunity if operated directly on the mains input
Operating frequency : DC to 60 Hz
Attenuation performance : high
Leakage current : < 1 mA
Rated current : 8 to 160 A
Voltage : ≤ 520 V
FN 3268: EMC/EMI Filter for Installations with Residual Current Device (RCD)

FN 3268

EMC/EMI Filter for Installations with Residual Current Device (RCD)

  • EMC/EMI 產品
  •  » 三相滤波器
  • Full functionality with RCDs according to IEC 61008 and new VDE 0664-110*
  • Compatible with 30 mA RCDs up to 30 m motor cable for electric shock protection according to IEC 61008
  • Compatible with 300 mA RCDs up to 100 m motor cable for fire protection according to IEC 60364-4-42 (VDE 0100-482)
Operating frequency : DC to 60 Hz
Rated current : 7 to 180 A
Attenuation performance : very high
Voltage : ≤ 520 V
Leakage current : 4.5 to 37 mA
Motor power : 4 to 110 kW
FN 3270: Compact EMC/RFI Filter for Industrial Motor Drive Applications

FN 3270

Compact EMC/RFI Filter for Industrial Motor Drive Applications

  • EMC/EMI 產品
  •  » 三相滤波器
  • Very compact and light weight design requiring minimum space
  • Easy, time-saving installation and contacting
  • Protective covers as optional accessory available
  • Attenuation performance according to EN 61800-3/A11
Operating frequency : DC to 60 Hz
Rated current : 10 to 1000 A
Attenuation performance : standard
Voltage : ≤ 520 V
Leakage current : 26.4 to 59.5 mA
Motor power : 5.5 to 560 kW
FN 3280: High-end Line Filter for Machinery/Equipment

FN 3280

High-end Line Filter for Machinery/Equipment

  • EMC/EMI 產品
  •  » 三相 + 中性線路濾波器
  • Now available up to 600 A
  • Compact, space-saving design, optimized for industrial machinery
  • Combines exceptional attenuation with low leakage current
  • Suitable for machines in mixed/domestic environments (Class A/B)
  • Increases also the immunity if operated directly on the mains input
Operating frequency : DC to 60 Hz
Leakage current : < 1 mA
Attenuation performance : very high
Rated current : 8 to 600 A
Voltage : ≤ 520 V
FN 3311/FN 3310: Compact power line AC EMC/EMI filter

FN 3311/FN 3310

Compact power line AC EMC/EMI filter

  • EMC/EMI 產品
  •  » 三相滤波器
  • High current 3-phase filter up to 2300 A
  • Extremely compact and light weight design
  • Minimum installation foot print
  • Performance optimised for standard purpose applications
  • FN 3310 series without Cy capacitors to ground
  • FN 3311 IT versions for use in IT power networks
Operating frequency : DC to 60 Hz
Climatic category : 40/100/21 acc. to IEC 60068-1
Terminals/Housing : Ni plated cu bars/Metal
Attenuation performance : standard
FN 3311 HV and FN 3310 HV: Compact 690 VAC power line EMC/EMI filter

FN 3311 HV and FN 3310 HV

Compact 690 VAC power line EMC/EMI filter

  • EMC/EMI 產品
  •  » 三相滤波器
  • High current 3-phase filter up to 2300 A
  • Extremely compact and light weight design
  • Minimum installation foot print
  • Performance optimised for standard purpose applications
  • FN 3310 HV series without Cy capacitors to ground
  • FN 3311 HVIT versions for use in IT power networks
Operating frequency : DC to 60 Hz
Climatic category : 40/100/21 acc. to IEC 60068-1
Terminals/Housing : Ni plated cu bars/Metal
Attenuation performance : standard
FN 9222: General Performance IEC Inlet Filter

(CQC except HI-types)

FN 9222

General Performance IEC Inlet Filter

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 20 A
  • Excellent performance/size ratio
  • Optional medical versions (B type) according to IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
  • Optional overvoltage protection (Z type)
Operating frequency : DC to 400 Hz

Attenuation performance : standard
Voltage : ≤ 250 V
Leakage current (B types) : 2 µA
Leakage current : 373 µA
Rated current : 1 to 20 A
FN 9222 E: General Performance EMC/EMI Filter with Earth Line Choke

(CQC except HI-types)

FN 9222 E

General Performance EMC/EMI Filter with Earth Line Choke

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 15 A
  • Excellent performance/size ratio
  • Integrated earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Optional wide mounting flanges
Operating frequency : DC to 400 Hz

Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 1 to 15 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 9226: HF Performance EMC/EMI Filter

FN 9226

HF Performance EMC/EMI Filter

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 10 A
  • Faston connection
  • Optional PCB through hole connection
  • Good HF coupling to the equipment housing
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
Attenuation performance : standard
FN 9233: High Performance EMC/EMI Filter

(CQC except HI-types)

FN 9233

High Performance EMC/EMI Filter

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 15 A
  • Excellent attenuation performance
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Operating frequency : DC to 400 Hz

Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 1 to 15 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 9233 E: High Performance EMC/EMI Filter with Earth Line Choke

(CQC except HI-types)

FN 9233 E

High Performance EMC/EMI Filter with Earth Line Choke

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 15 A
  • Excellent attenuation performance
  • Integrated earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Operating frequency : DC to 400 Hz

Attenuation performance : very high
Voltage : ≤ 250 V
Rated current : 1 to 15 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 9244: Excellent Performance EMC/EMI Filter

(CQC except HI-types)

FN 9244

Excellent Performance EMC/EMI Filter

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Superior attenuation performance
  • Optional earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Operating frequency : DC to 400 Hz

Attenuation performance : very high
Voltage : ≤ 250 V
Leakage current (B types) : 2 µA
Leakage current : 373 µA
Rated current : 1 to 15 A
FN 9244 E: Excellent Performance EMC/EMI Filter with Earth Line Choke

(CQC except HI-types)

FN 9244 E

Excellent Performance EMC/EMI Filter with Earth Line Choke

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 15 A
  • Superior attenuation performance
  • Integrated earth line choke
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S and S1 type)
  • Hot inlet versions (HI type)
Operating frequency : DC to 400 Hz

Attenuation performance : very high
Voltage : ≤ 250 V
Leakage current (B types) : 2 µA
Leakage current : 373 µA
Rated current : 1 to 15 A
FN 9246: High Performance IEC Inlet Filter

FN 9246

High Performance IEC Inlet Filter

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 20 A
  • Optional medical versions (B type)
  • Rear mounting
  • Excellant attenuation in the lower
  • frequency range
Operating frequency : DC to 400 Hz
Attenuation performance : high
Voltage : ≤ 250 V
Rated current : 1 to 20 A
Leakage current (B types) : 2 µA
Leakage current : 373 to 797 µA
FN 9260: General Purpose Power Entry Module with Fuses

FN 9260

General Purpose Power Entry Module with Fuses

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 10 A
  • Integrated single/dual fuse holder
  • Optional reduced leakage current versions (A/B type)
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S type)
  • Good attenuation performance
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Leakage current : 373 µA

FN 9264: General Purpose Power Entry Module with Switch

FN 9264

General Purpose Power Entry Module with Switch

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 10 A
  • High quality 2-pole rocker switch
  • Optional reduced leakage current versions (A/B type)
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S type)
  • Good attenuation performance
Attenuation performance : high
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Leakage current : 373 µA

FN 9280: Ultra Compact and Versatile Filtered Power Entry Module

(CQC except HI-types; Patent US 20110227692/US 8766761; CN ZL201080069589.0)

FN 9280

Ultra Compact and Versatile Filtered Power Entry Module

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Single stage filter
  • Ultra compact design
  • Rated currents up to 10 A
  • dual-fuse holder
  • Fuses Ø5x20 mm
  • 2-pole rocker switch
  • Good attenuation performance
  • Faston or spring cage terminals
Voltage : ≤ 250 V
Attenuation performance : high
Rated current : 1 to 10 A
Leakage current standard : < 500 µA
Leakage current medical (B types) : < 5 µA

FN 9290: Ultra Compact and Versatile Filtered Power Entry Module

(CQC except HI-types; Patent US 20110227692/US 8766761; CN ZL201080069589.0)

FN 9290

Ultra Compact and Versatile Filtered Power Entry Module

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Dual stage filter
  • Ultra compact design
  • Rated currents up to 10 A
  • Dual fuse holder
  • 2-pole rocker switch
  • Good attenuation performance
  • Faston or spring cage terminals
Voltage : ≤ 250 V
Operating frequency : DC to 400 Hz
Attenuation performance : very high
Rated current : 1 to 10 A
Leakage current standard : < 500 µA
Leakage current medical (B types) : < 5 µA
IL 13P Rewireable IEC C13 Locking Connector: IL 13P IEC C13 Rewireable Connectors with Locking System

Patents: EU Patent No. EP 14594121

IL 13P Rewireable IEC C13 Locking Connector

IL 13P IEC C13 Rewireable Connectors with Locking System

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » 安全型電源線
  • Guards against accidental disconnection
  • Requires no other equipment or special inlets to secure it
  • Rewireable - offering total flexibility when assembling cables
  • Fits any Schaffner IEC C14 inlet Filter
  • Can be retrofitted
  • Various power line plugs for international usage
  • LSZH - Low smoke zero halogen
Attenuation performance : very high
Cable size : 3C x 1.50mm²
Color : black
IL 13, 13 P, 19: Power Cord with Locking System

IL 13, 13 P, 19

Power Cord with Locking System

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » 安全型電源線
  • Locking system for standardized IEC C14/C20 inlet filter
  • No accidental disconnection
  • Rated current up to 10 A (C13 plug), up to 15 A (C13P plug), and up to 16 A (C19 plug)
  • Fits any Schaffner IEC C14/C20 inlet filter
  • Retrofit for any IEC C14/C20 inlet
  • Various power line plugs for international usage
Attenuation performance : standard
Color : black

Connector line side : C14; CEE7/VII; BS 1363; NEMA 5-15; SEV 1011; JIS 8303
Connector load side : C13 with IEC lock
Frequency : 50/60 Hz
Length : 2 m
Rated Current : 10 A
Voltage : ≤ 250 V
RN series: Current-compensated Chokes

RN series

Current-compensated Chokes

  • EMC/EMI 產品
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 0.3 to 10 A
  • DC to 400 Hz frequency
  • 100 kHz to 3 MHz common-mode resonance frequency
  • Dual-choke configurations
  • Multiple PCB-mounting options
Inductance : 0.4 to 100 mH
Rated current : 0.3 to 10 A
Frequency (DC) : 1 kHz
Attenuation performance : very high

RI series: Saturating Chokes

RI series

Saturating Chokes

  • EMC/EMI 產品
  •  » EMC/EMI Chokes
  •  » 飽和型Chokes
  • Rated currents from 1.5 to 25 A
  • Up to 500 VAC operating voltage
  • DC to 1 kHz frequency
  • Single or dual-choke configurations
Frequency (DC) : 1 kHz
Voltage : ≤ 500 V
Rated current : 1.5 to 25 A
Attenuation performance : very high
RD series: Current-compensated Chokes

RD series

Current-compensated Chokes

  • EMC/EMI 產品
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 6 to 64 A
  • Up to 600 VAC or 850 VDC
  • DC to 400 Hz frequencies
  • Dual, triple and quad-choke configurations
Operating frequency : DC to 400 Hz
Rated current : 6 to 64 A
Inductance : 0.2 to 25 mH
Attenuation performance : very high
RB series: Current-compensated Chokes

RB series

Current-compensated Chokes

  • EMC/EMI 產品
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents from 16 to 50 A
  • Up to 600 VAC or 1000 VDC
  • 2- and 3-wire configurations
  • Horizontal and vertical PCB mounting types
  • Ruggedized saturation and thermal behavior
  • Open construction for forced and convection cooling
  • Straightforward pin-out for easy PCB design
Operating frequency : DC to 400 Hz
Rated current : 16 to 50 A
Inductance : 0.2 to 3 mH
Attenuation performance : very high
IT series with single secondary winding: Pulse Transformer with Single Secondary Winding

IT series with single secondary winding

Pulse Transformer with Single Secondary Winding

  • EMC/EMI 產品
  •  » 脈衝變壓器
  • Galvanic separation of drive and power circuit
  • Voltage resistance up to 8 kV
  • Ignition current up to 3 A
  • Turns ratio up to 3:1
Ignition currents : 0.1 to 3 A
Rise time : 0.3 to 2.3 µs
Frequency : ≤ 40000 Hz
Attenuation performance : very high
Operating frequency : DC to 40000 Hz
IT series with double secondary winding: Pulse Transformer with Double Secondary Winding

IT series with double secondary winding

Pulse Transformer with Double Secondary Winding

  • EMC/EMI 產品
  •  » 脈衝變壓器
  • Galvanic separation of drive and power circuit
  • Voltage resistance up to 4 kV
  • Ignition current up to 1 A
  • Turns ratio up to 3:1:1
Ignition currents : 0.1 to 1 A
Rise time : 0.4 to 4 µs
Frequency : ≤ 40000 Hz
Attenuation performance : very high
Operating frequency : DC to 40000 Hz
EV/EH series: Common-mode Suppression Chokes

EV/EH series

Common-mode Suppression Chokes

  • EMC/EMI 產品
  •  » EMC/EMI Chokes
  •  » Common-mode Chokes
  • Rated currents up to 5 A
  • Broadband attenuation characteristics
  • Low magnetic leakage flux
  • UL rated materials
  • RoHS compliant
Operating frequency : DC to 400 Hz
Voltage : ≤ 250 V
Rated current : 0.3 to 5 A
Inductance : 0.5 to 90 mH
Attenuation performance : very high
FN 258: Book-style EMC/RFI Filter for Inverters and Power Drive Systems

UL/CSA: FN 258 up to 180 A (ex. -180-07)

FN 258

Book-style EMC/RFI Filter for Inverters and Power Drive Systems

  • EMC/EMI 產品
  •  » 三相滤波器
  • Industry standard EMC solution for three-phase PDS filtering
  • Slim space-saving book-style housing
  • Solid safety connector blocks or optional wire output connections
  • Excellent attenuation performance
  • HV versions for up to 690 VAC
  • HVIT versions for IT distribution networks
  • P/L versions with low leakage current
Rated current : 7 to 250 A
Operating frequency : DC to 60 Hz
Voltage : ≤ 690 V
Motor power : 4 to 132 kW
Leakage current : 0.7 to 30 mA
Attenuation performance : very high
FN 280: Compact filtered power entry module

(CQC except HI-types)

FN 280

Compact filtered power entry module

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Complies with IEC/EN 60601-1
  • Rated currents up to 10 A
  • Single or dual-fuse holder
  • Fuses Ø5 x 20 mm
  • 2-pole rocker switch
  • General purpose application
  • Optional earth line choke (E type)
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Leakage current : 373 µA
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Leakage current (B types) : 2 µA
FN 332: Performance EMI Filter

FN 332

Performance EMI Filter

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 一階濾波器
  • Rated currents from 1 to 10 A
  • Compact housing
  • Optional overvoltage protection (Z type)
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Leakage current : 340 µA
FN 343: Performance EMI Filter

FN 343

Performance EMI Filter

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 二階濾波器
  • Rated currents from 1 to 10 A
  • Dual-stage filter
  • Compact housing
  • Integrated earth line choke
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Leakage current : 0.734 to 0.867 mA
FN 350: Compact EMC/RFI Filter for Motor Drives

FN 350

Compact EMC/RFI Filter for Motor Drives

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 一階濾波器
  • Compact filter solution for single-phase motor drive applications
  • Industrial grade safety terminal blocks
  • Designed to meet EN 55011/14/22
  • Compliant with IEC 60950
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Leakage current : 4.9 to 11 mA
FN 351: General Purpose EMC Filter

Approvals up to 110 A

FN 351

General Purpose EMC Filter

  • EMC/EMI 產品
  •  » 三相滤波器
  • EMC solution for industrial inverters and motor drives
  • Rated currents from 8 to 280 A
  • Selectable voltage level of 440 V and 520 V
  • High differential and common-mode attenuation
Operating frequency : DC to 60 Hz
Rated current : 8 to 280 A
Attenuation performance : high
Voltage : ≤ 520 V
Leakage current : 1.9 to 42.9 mA
Motor power : 3 to 160 kW
FN 352 Z: Multi-stage EMI Filter

FN 352 Z

Multi-stage EMI Filter

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 三階濾波器
  • Rated currents from 6 to 30 A
  • Surge pulse protection up to 2 kA
  • Solder or screw connection
Operating frequency : DC to 400 Hz
Attenuation performance : very high
FN 354: Compact Three-phase and Neutral Line Filter for High Frequency Attenuation

FN 354

Compact Three-phase and Neutral Line Filter for High Frequency Attenuation

  • EMC/EMI 產品
  •  » 三相 + 中性線路濾波器
  • Compact four-wire filter for applications with limited space
  • High attenuation performance up to 300 MHz
  • Equally suitable for star and delta power networks
Operating frequency : DC to 60 Hz
Attenuation performance : high
Leakage current : 0.175 to 0.5 mA
Rated current : 4 to 25 A
Voltage : ≤ 440 V
FN 355: Ultra-compact Low Leakage current EMC/EMI Filter

FN 355

Ultra-compact Low Leakage current EMC/EMI Filter

  • EMC/EMI 產品
  •  » 三相 + 中性線路濾波器
  • Ultra-compact four-wire filter for applications lacking space
  • Exceptional low operating leakage current
  • Equally suitable for star and delta power networks
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 440 V
Rated current : 3 to 20 A
Leakage current : 0.07 to 0.29 mA
FN 356: General Purpose EMC/EMI Line Filter

(FN 356 up to 100 A)

FN 356

General Purpose EMC/EMI Line Filter

  • EMC/EMI 產品
  •  » 三相 + 中性線路濾波器
  • Three-phase and neutral line filter for general four-wire filtering tasks
  • Choice of connection style
  • Low operating leakage current
  • Compliant with IEC 60950
  • Suitable to meet EN 55011/14/22
Attenuation performance : high
Leakage current : 0.43 to 8 mA
Operating frequency : 0 to 60 Hz
Rated current : 16 to 150 A
Voltage : ≤ 440 V
FN 370: Versatile Filtered Power Entry Module

FN 370

Versatile Filtered Power Entry Module

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 6 A
  • Single or dual-fuse holder
  • Fuses Ø6.3 x 32 mm or Ø5 x 20 mm
  • Voltage selector 100/120/230/240 V
  • General purpose application
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Rated current : 2 to 6 A
Voltage : ≤ 250 V
Leakage current : 373 µA
Leakage current (B types) : 2 µA
FN 380: Versatile Filtered Power Entry Module

FN 380

Versatile Filtered Power Entry Module

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 6 A
  • Single or dual-fuse holder
  • Fuses Ø6.3 x 32 mm Ø5 x 20 mm
  • 2-pole rocker switch
  • General purpose application
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 2 to 6 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 390: Versatile Filtered Power Entry Module

FN 390

Versatile Filtered Power Entry Module

  • EMC/EMI 產品
  •  » IEC 輸入濾波器 / 電源輸入模組
  •  » IEC 輸入濾波器
  • Rated currents up to 10 A
  • For one or two fuses
  • Fuses Ø6.3 x 32 mm or Ø5 x 20 mm
  • 2-pole rocker switch
  • Voltage selector
  • Optional earth line choke (E type)
Operating frequency : DC to 400 Hz
Attenuation performance : high
Voltage : ≤ 250 V
Rated current : 1 to 10 A
Leakage current : 560 to 797 µA
FN 402: Low Cost PCB Filter

FN 402

Low Cost PCB Filter

  • EMC/EMI 產品
  •  » PCB 濾波器
  • Rated currents from 0.5 to 6.5 A
  • Compact PCB-mountable design
  • Very low profile
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 0.5 to 6.5 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 405: PCB-mounting filter

FN 405

PCB-mounting filter

  • EMC/EMI 產品
  •  » PCB 濾波器
  • Rated currents from 0.5 to 10 A
  • Compact PCB-mountable design
  • Low profile
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 0.5 to 10 A
Leakage current : 373 µA
FN 406: Ultra Compact EMC Filter

FN 406

Ultra Compact EMC Filter

  • EMC/EMI 產品
  •  » PCB 濾波器
  • Rated currents from 0.5 to 8.4 A
  • Aluminium case
  • Very compact PCB-mountable design
  • Low profile
  • Optional medical versions (B type)
Operating frequency : DC to 400 Hz
Attenuation performance : standard
Voltage : ≤ 250 V
Rated current : 0.5 to 8.4 A
Leakage current (B types) : 2 µA
Leakage current : 373 µA
FN 410: High Performance Two-stage PCB-mounting EMC Filter

FN 410

High Performance Two-stage PCB-mounting EMC Filter

  • EMC/EMI 產品
  •  » PCB 濾波器
  • Rated currents from 0.5 to 6 A
  • High attenuation two-stage design
  • PCB-mountable design
Operating frequency : DC to 400 Hz
Attenuation performance : high
Leakage current : 373 µA
Rated current : 0.5 to 6 A
Voltage : ≤ 250 V
FN 700 Z: Three-stage EMC/EMI Filter

FN 700 Z

Three-stage EMC/EMI Filter

  • EMC/EMI 產品
  •  » 單相濾波器
  •  » 三階濾波器
  • Rated currents from 6 to 20 A
  • IEC inlet for 6 and 10 A versions
  • Up to 3 GHz attenuation
  • High surge voltage protection
Operating frequency : DC to 400 Hz
Attenuation performance : very high
FN 751X: AC Feedthrough Capacitor

FN 751X

AC Feedthrough Capacitor

  • EMC/EMI 產品
  •  » 貫穿(通)電容及濾波器
  •  » 電容器
  • IEC/EN 60384-14 approval
  • Rated currents from 10 to 200 A
  • 5 kV pulse test capability
  • Class Y2 capacitor
Voltage : ≤ 300 V
Rated current : 10 to 200 A
Frequency : 50/60 Hz
Capacitance : 2.2 to 220 nF
Attenuation performance : high
Leakage current : 0.21 to 20.7 mA
Operating frequency : DC to 60 Hz
FN 756X: DC Feedthrough Capacitor

FN 756X

DC Feedthrough Capacitor

  • EMC/EMI 產品
  •  » 貫穿(通)電容及濾波器
  •  » 電容器
  • EN/IEC 60384-14 approval
  • Rated currents from 10 to 200 A
  • 2.5 kV pulse test capability
  • Class Y4 capacitor
Rated current : 10 to 200 A
Leakage current : 0.49 to 230 mA
Capacitance : 10 to 4700 nF
Attenuation performance : high
Voltage : ≤ 130 V
FN 761X: AC Feedthrough Filter

FN 761X

AC Feedthrough Filter

  • EMC/EMI 產品
  •  » 貫穿(通)電容及濾波器
  •  » 濾波器
  • IEC/EN 60939 approval
  • Rated currents from 10 to 100 A
  • 5 kV pulse test capability
  • Class Y2 capacitor
Voltage : ≤ 300 V
Frequency : 50/60 Hz
Leakage current : 1.89 to 188 mA
Capacitance : 10 to 1000 nF
Rated current : 10 to 100 A
Attenuation performance : very high
Operating frequency : DC to 60 Hz
FN 766X: DC Feedthrough Filter

FN 766X

DC Feedthrough Filter

  • EMC/EMI 產品
  •  » 貫穿(通)電容及濾波器
  •  » 濾波器
  • IEC/EN 60939 approval
  • Rated currents from 10 to 200 A
  • 2.5 kV pulse test capability
  • Class Y4 capacitor
Leakage current : 0.98 to 460.7 mA
Capacitance : 10 to 4700 nF
Rated current : 10 to 200 A
Attenuation performance : very high
Voltage : ≤ 130 V