Schaffner 所有產品

  • Ecosine 主動式諧波濾波器

    Shaping eletcrical power

    Ecosine 主動式諧波濾波器

    動態提供精準控制的電流，能取消在連線時破壞諧波電流的整體頻譜

為專業電力品質模擬及解決方案而設計的電力品質模擬器
10 products were found.
FN 3530/FN 3531: Ecosine active sync power module – 3p-3w

FN 3530/FN 3531

Ecosine active sync power module – 3p-3w

  • Ecosine 主動式
  •  » Ecosine Active Sync (<5% THID)
  • Most effective harmonic mitigation up to 50th order, for both even and odd orders
  • THDI < 5%, adjustable
  • Reactive power compensation and load balancing capability
  • New modular concept offering optimal tailored solution to customer need
  • Most compact design, robust, efficient. Ecosine active sync 60Arms power module represents the most compact design (440 × 420 × 222 mm), suits the broadest temperature range (0…50°C full performance, up to 55°C derating)
  • High efficiency and low acoustic noise
  • Response time less than 100 microseconds
  • Reliable and ready to use
  • IP 21 optional kit available
Mains frequency : 50/60Hz ± 3 Hz
Mains voltage : 380VAC ± 15% - 480VAC± 10%
Number of phases : 3-phase 3-wire
Rated phase mitigation current : 60 Arms

Flexible installation as wall mount (flat or book) or in standard cabinet with slide-in-technology

Order power module FN 3531 including current transformer interface: for standalone application and new installation.

Order power module FN 3530 (without CT interface): for extension of installation to higher current range in combination with one FN 3531.

FN 3532: Ecosine active sync Double Power Pack – 3p-3w

FN 3532

Ecosine active sync Double Power Pack – 3p-3w

  • Ecosine 主動式
  •  » Ecosine Active Sync (<5% THID)
  • Most effective harmonic mitigation up to 50th order, for both even and odd orders
  • THDI < 5%, adjustable
  • Reactive power compensation and load balancing capability
  • New modular concept offering optimal tailored solution to customer need
  • Most compact design, robust, efficient. Ecosine active sync 120Arms DPP, built with two power modules (440 × 420 × 222 mm each), suits the broadest temperature range (0…50°C full performance, up to 55°C derating)
  • High efficiency and low acoustic noise
  • Response time less than 100 microseconds
  • Reliable and ready to use
  • 2 FN 3530 power modules connected with High Speed Bus
  • Only 1 current transformer and 1 display module are needed
  • IP 21 optional kit available
Mains frequency : 50/60Hz ± 3 Hz
Mains voltage : 380VAC ± 15% - 480VAC± 10%
Number of phases : 3-phase 3-wire
Rated phase mitigation current : 120 Arms

Flexible installation as wall mount (flat or book) or in standard cabinet with slide-in-technology

FN 3540/FN 3541: Ecosine active sync power module – 3p-4w

FN 3540/FN 3541

Ecosine active sync power module – 3p-4w

  • Ecosine 主動式
  •  » Ecosine Active Sync (<5% THID)
  • Most effective harmonic mitigation up to 50th order, for both even and odd orders
  • THDI < 5%, adjustable
  • Reactive power compensation and load balancing capability
  • New modular concept offering optimal tailored solution to customer need
  • Most compact design, robust, efficient. Ecosine active sync 60Arms power module represents the most compact design (440 × 420 × 222 mm), suits the broadest temperature range (0…50°C full performance, up to 55°C derating)
  • High efficiency and low acoustic noise
  • Response time less than 100 microseconds
  • Reliable and ready to use
  • IP 21 optional kit available
Mains frequency : 50/60Hz ± 3 Hz
Mains voltage : 380VAC ± 15% - 415VAC± 10%
Number of phases : 3-phase 4-wire
Rated phase mitigation current : 60 Arms

Flexible installation as wall mount (flat or book) or in standard cabinet with slide-in-technology

Order power module FN 3541 including current transformer interface: for standalone application and new installation.

Order power module FN 3540 (without CT interface): for extension of installation to higher current range in combination with one FN 3541.

FN 3542: Ecosine active sync Double Power Pack – 3p-4w

FN 3542

Ecosine active sync Double Power Pack – 3p-4w

  • Ecosine 主動式
  •  » Ecosine Active Sync (<5% THID)
  • Most effective harmonic mitigation up to 50th order, for both even and odd orders
  • THDI < 5%, adjustable
  • Reactive power compensation and load balancing capability
  • New modular concept offering optimal tailored solution to customer need
  • Most compact design, robust, efficient. Ecosine active sync 120Arms DPP, built with two power modules (440 × 420 × 222 mm each), suits the broadest temperature range (0…50°C full performance, up to 55°C derating)
  • High efficiency and low acoustic noise
  • Response time less than 100 microseconds
  • Reliable and ready to use
  • 2 FN 3530 power modules connected with High Speed Bus
  • Only 1 current transformer and 1 display module are needed
  • IP 21 optional kit available
Mains frequency : 50/60Hz ± 3 Hz
Mains voltage : 380VAC ± 15% - 480VAC± 10%
Number of phases : 3-phase 4-wire
Rated phase mitigation current : 120 Arms

Flexible installation as wall mount (flat or book) or in standard cabinet with slide-in-technology

FN 3545: Ecosine active sync cabinet version – 3p -3w and 3p-4w

FN 3545

Ecosine active sync cabinet version – 3p -3w and 3p-4w

  • Ecosine 主動式
  •  » Ecosine Active Sync (<5% THID)
  • Most effective harmonic mitigation up to 50th order, for both even and odd orders
  • THDI < 5%, adjustable
  • Reactive power compensation and load balancing capability
  • New modular concept of ecosine active sync offering optimal tailored solution from 1 to 5 power modules in one IP54 enclosure
  • Most compact design, robust, efficient. Response time less than 100 microseconds
  • Broadest temperature range (0…40°C full performance, up to 50°C derating)
  • High efficiency and low acoustic noise
  • Reliable and ready to use
  • Air-cooling
  • Only 1 display module is needed
Mains frequency : 50/60Hz ± 3 Hz
Rated phase mitigation current : up to 300 Arms

Easy Installation, simple interface to customer and intuitive operation

SYNC300A: Sync module for ecosine active sync (<5% THID)

SYNC300A

Sync module for ecosine active sync (<5% THID)

  • Ecosine 主動式
  •  » Ecosine Active Sync (<5% THID)
  • Flexible installation with current transformers on mains or load side; one simple CT connection point for all modules
  • Intelligent load and energy management
  • Simple and modular installation (wall-mount or rack-mount); recommended for 180 A and more
  • Easy filter scalability and extension of mitigation current up to 1200 A
  • Available as part of the ecosine active sync cabinet FN3545-series or as an option for later upgrade or wall-mount
  • IP 21 optional kit available
  • Input voltage : 22,0...27,0 VDC
Compliant IEC/EN 60601-1
Easy Installation, simple interface to customer and smart features
FN 3420: Ecosine active - the Compact, Fast, and Flexible Solution for Better Power Quality (3-wire)

(30 A to 100 A UL recognized/200 A to 300 A UL listed)

FN 3420

Ecosine active - the Compact, Fast, and Flexible Solution for Better Power Quality (3-wire)

  • Ecosine 主動式
  •  » Ecosine 主動式（<5% THID）
  • Global or selective compensation of Harmonic currents up to the 50th order
  • Compensation of displacement power factor
  • Load balancing capability
  • Response time of less than 300 microseconds
  • Compact solution for easy installation and intuitive operation
Compensation current : 30 to 300 A
Frequency : 47 to 63 Hz
THID : <5%, adjustable
Voltage : 200 to 480 V
FN 3420: Ecosine active Harmonic Filters 600/690 V (3-wire)

UL listed pending

FN 3420

Ecosine active Harmonic Filters 600/690 V (3-wire)

  • Ecosine 主動式
  •  » Ecosine 主動式（<5% THID）
  • Global or selective compensation of Harmonic currents up to the 50th order
  • Compensation of displacement power factor
  • Load balancing capability
  • Response time of less than 300 microseconds
  • 3-level topology with 20-30% lower losses
Compensation current : 0 to 200 A
Frequency : 47 to 63 Hz
THID : <5%, adjustable
Voltage : 500 to 690 V
FN 3420 GL: Ecosine active Harmonic Filters (3-wire) with Germanischer Lloyd

FN 3420 GL

Ecosine active Harmonic Filters (3-wire) with Germanischer Lloyd

  • Ecosine 主動式
  •  » Ecosine 主動式（<5% THID）
  • Global or selective compensation of harmonic currents up to the 50th order
  • Compensation of displacement power factor
  • Load balancing capability
  • Response time of less than 300 microseconds
  • Compact solution for easy installation and intuitive operation
Compensation current : 100 or 120 A
Frequency : 47 to 63 Hz
THID : <5%, adjustable
Voltage : 380 to 480 V
FN 3430: Ecosine active - the Compact, Fast, and Flexible Solution for Better Power Quality (4-wire)

FN 3430

Ecosine active - the Compact, Fast, and Flexible Solution for Better Power Quality (4-wire)

  • Ecosine 主動式
  •  » Ecosine 主動式（<5% THID）
  • Global or selective compensation of harmonic currents up to the 50th order
  • Compensation of displacement power factor
  • Load balancing capability
  • Response time of less than 300 microseconds
  • Compact solution for easy installation and intuitive operation
Compensation current : 30 to 300 A
Frequency : 47 to 63 Hz
THID : <5%, adjustable
Voltage : 380 to 415 V